Diamond Cut
Alloy Wheels

Alloy Fix

Diamond Cut Alloy refurbishments

Diamond cut alloy wheels are the top choice for car enthusiasts. The polished metal catches the light. It creates a stunning two-tone effect on any vehicle.

At Alloy Fix, we specialise in alloy wheel refurbishment to a diamond cut finish. Our technicians use advanced CNC lathe machines. They create that sought-after polished look. Worn wheels or fancy an upgrade? We can help.

We offer a 3 year warranty on all diamond cut alloy refurbishment. No other company provides this guarantee.

A two-tone diamond cut wheel on the workbench

Get your exact price online in a few clicks.Pick your branch, tell us about your wheels and see the price before you book.

Get your price and book

Before and after

Real wheels, real results

One real job from our workshop, from the moment it came in to the finished wheel.
  • Before
    A black alloy wheel in the workshop booth
    The wheel in our booth.
  • After
    The same wheel finished with a diamond cut face
    Finished with a fresh diamond cut face.

The finish

What We Can Fix

  • Appearance

    Polished metal with fine machining lines

  • Contrast

    Two-tone effect with painted inner sections

  • Protection

    Clear lacquer to prevent corrosion

  • Style

    Premium look for any vehicle

Know what needs fixing?The booking calculator shows your price before you book.

Get your price and book

What Are Diamond Cut Wheels?

A diamond cut alloy is a type of alloy wheel finish. It is created using specialist machining. During the diamond cutting process, the wheel sits on a CNC lathe. A diamond-tipped cutting machine removes a thin layer of metal. This reveals bright aluminium with fine grooves that shimmer.

Most diamond cut wheels have contrasting painted sections. The inner spokes are finished in dark grey or gloss black. This two-tone look is popular on BMW, Audi, Mercedes and Range Rover.

A clear lacquer coating goes on top. This helps prevent corrosion and protects the exposed metal.

An alloy wheel being diamond cut on the lathe

Why Choose Diamond Cut Alloy Wheels?

Stunning visual impact. The polished face reflects light. Your wheels become a real feature of your car.

Modern, premium look. Alloy wheel diamond cutting is the finish high-end manufacturers use. It gives any vehicle an upmarket appearance.

Two-tone styling. Pick your contrast colour. Gloss black, anthracite grey and gunmetal are popular choices.

Increased vehicle value. Fresh cut alloy wheels make a difference when selling. Diamond cut repairs show buyers the car has been looked after.

Cost-effective upgrade. Refurbishing diamond cut wheels costs less than new alloys. You get factory-fresh results at a fraction of the price.

Not sure if your wheels need work? Read our guide on the signs your alloy wheels need refurbishment.

Close-up of a freshly diamond cut multi-spoke wheel

Can Diamond Cut Wheels Be Repaired?

Yes. Kerb marks, scratches, corrosion and peeling lacquer can usually be put right. The catch is that a diamond cut face cannot be fixed with paint or a touch-up pen. Paint covers the bright metal, so the repair stands out against the rest of the wheel. To get the proper finish back, the face has to be machined again on a lathe and then sealed with fresh lacquer.

This is not a job you can do at home. It needs a CNC lathe, a trained technician who knows how much metal can safely come off, and the right lacquer and curing equipment. A poor repair can leave an uneven finish, and cutting away too much metal can weaken the wheel.

A diamond cut wheel in the booth for its lacquer coat

Step by step

How We Refurbish a Diamond Cut Wheel

Every wheel goes through the same careful stages. You can see more detail on our process page.

  1. Kerb damage and scuffs on alloy wheel spokes

    Step 1: Inspection

    We check the wheel for kerb damage, corrosion, buckles and cracks, and look for signs that it has been re-cut before. This tells us whether diamond cutting is safe for your wheel.

  2. Sanding an alloy wheel to prepare it for a new finish

    Step 2: Tyre off and strip

    The tyre is removed and the old lacquer, paint and corrosion are stripped away, so we start from clean metal.

  3. Close-up of an alloy wheel being welded

    Step 3: Repairs

    Any kerb damage is repaired. If the wheel is buckled or cracked, that is dealt with first, through buckled wheel repair or cracked wheel repair.

  4. A wheel in the powder coating booth

    Step 4: Base colour

    The wheel is coated in its base colour. On a two-tone wheel, this is the colour you see between the bright cut areas.

  5. An alloy wheel being diamond cut on the lathe

    Step 5: Diamond cutting

    The wheel is mounted on the CNC lathe, which takes a very thin, even layer off the face to reveal fresh, bright metal.

  6. A diamond cut wheel in the booth for its lacquer coat

    Step 6: Lacquer and curing

    A clear lacquer is applied to seal the bare metal, then cured so it sets hard.

  7. A set of four diamond cut alloy wheels

    Step 7: Final checks

    We inspect the finish, refit the tyre and balance the wheel before it goes back on your car.

How Many Times Can a Diamond Cut Wheel Be Re-Cut?

Each time a wheel is diamond cut, the lathe removes a fine layer of metal. That metal does not grow back, so a wheel can only be re-cut a limited number of times before the face becomes too thin to cut safely. There is no single number that applies to every wheel. It depends on:

  • How thick the wheel was to begin with. Some designs have more metal to work with than others.
  • How deep the damage is. Deep kerb marks and heavy corrosion need more metal taken off than light scuffs.
  • How many times it has been cut before. A wheel that has already been refurbished is closer to its limit.
  • The wheel design. Some spoke patterns have thinner sections in places.

Our technicians check every wheel before cutting. If another cut would not be safe, we will tell you honestly and suggest another option.

An alloy wheel powder coated in matt black

When Powder Coating Is the Better Choice

If a wheel has been re-cut as many times as it safely can, or the corrosion is very deep, powder coating is often the better route. Powder coating does not remove any metal. The wheel is coated in a tough finish that is baked on in an oven, which stands up well to chips and bad weather. A silver or metallic shade keeps a similar look, or you can choose a completely new colour.

Gunmetal and diamond cut wheels ready to go back on

Why Diamond Cut Wheels Corrode

The weak point of a diamond cut wheel is its thin layer of clear lacquer. Underneath sits bare, machined aluminium. While the lacquer is unbroken, the metal is sealed. Once the lacquer is broken by a kerb scuff, a stone chip or small cracks that form over time, water and road salt can creep underneath and attack the metal.

This shows up as white, cloudy marks that spread out in fine lines under the clear coat. Aluminium has a natural protective layer, but it only stays stable in mild conditions. Strong acids and strong alkalis break it down, which is why harsh cleaners do so much harm to these wheels.

Early warning signs

Check the outer edge of the wheel face now and then, as this is where damage usually starts. Look for:

  • Small cloudy or milky patches under the clear coat
  • Fine white lines creeping out from a chip or scuff
  • Bubbling or lifting lacquer that no longer feels smooth
  • Dull grey spots where the shine has faded
  • Small chips that show bare metal

Act early. Once corrosion spreads, more metal has to be cut away to remove it, which uses up more of the wheel's life. A small early repair is nearly always the cheaper and easier choice.

A refinished silver alloy wheel

Cleaning Diamond Cut Wheels Safely

Gentle, regular cleaning protects the lacquer, and the lacquer is what keeps corrosion out. Choose a pH-neutral wheel cleaner that says it is safe for lacquered or diamond cut wheels. A good car shampoo in warm water is also fine for regular washing.

What to do

  • Let the wheels cool down after driving before you clean them.
  • Rinse off loose dirt and brake dust first, so you do not rub grit into the surface.
  • Clean one wheel at a time with a soft brush, sponge or microfibre cloth.
  • Do not let the cleaner dry on the wheel. Rinse it off fully.
  • Dry each wheel with a clean, soft cloth so water does not sit in the grooves.
  • Add a wheel sealant now and then. It makes brake dust easier to wash off and gives the lacquer extra protection.
  • Clean more often in winter, when road salt is on the roads.

What to avoid

  • Acid-based or strong "wheel brightening" cleaners, which can eat into the lacquer and the metal underneath.
  • Household products such as bleach.
  • Wire brushes, scouring pads or anything abrasive.
  • Holding a pressure washer close to the wheel, which can force water into small chips in the lacquer.

For a simple routine, see our guide on how to clean alloy wheels with WD40.

What Affects the Cost of Diamond Cut Refurbishment?

Prices depend on wheel size, how much damage there is and the finish you choose. A wheel that needs straightening or welding before it can be re-cut will cost more than one with a light scuff, and a two-tone finish takes more work than a single colour. Refurbishing is usually far cheaper than buying a new diamond cut wheel. See our price list for current prices.

All our diamond cut and powder coated wheels come with a 3 year warranty, and we offer loan wheels so you can drive away the same day. Book at our Romford, Dartford or Hemel Hempstead workshop.

Why Choose Alloy Fix?

  • 800+ Five-Star Reviews

    Alloy Fix has 800+ five-star reviews. Read what our customers say before you book.

  • Loan Wheels Available

    Leaving your car may not always be an option - at Alloy Fix we offer loan wheels, so you can drive away the same day

  • 3 Year Warranty

    We are the only company to offer a 3 year warranty on diamond cut alloy refurbishment. This covers the lacquer against peeling and corrosion.

  • Expert Technicians

    Our team has years of experience with the diamond cutting process. We have refurbished thousands of wheels for all major manufacturers.

  • 3 Workshops

    3 workshops: Romford, Dartford, Hemel Hempstead. Book at the one nearest to you.

Finished wheels

Recent work from our workshops

  • A stack of freshly diamond cut wheels
  • Gunmetal and diamond cut wheels ready to go back on
  • A set of four diamond cut alloy wheels
  • The same wheel finished with a diamond cut face

Want a finish like these?Get your price for repairs, diamond cut or powder coating in a few clicks.

Get your price and book

How it works

Our Simple 3 Step Process

We follow a thorough repair process at Alloy Fix. Every step ensures factory-quality results. Learn more about each stage in our detailed guide to the process for diamond cut alloy wheel refurbishment.

  1. Kerb damage and scuffs on alloy wheel spokes

    Step 1: Get In Touch with our experts

    Talk to one of our expert technicians and explain the problem with your alloy wheels.

  2. A two-tone diamond cut wheel on the workbench

    Step 2: Receive a Free quote

    Our team will give you advice on the best course of action next and provide you a bespoke quote.

  3. A stack of freshly diamond cut wheels

    Step 3: Get Booked in!

    Select the best available time to get your wheels booked in one of our workshops.

Our 3 workshops

Quote & Book

Fill the details in the best you can and book an appointment at our Romford, Dartford or Hemel Hempstead branch.

Calculate Price

Not sure which branch is closest? See every area we cover or use our store locator.

Frequently Asked Questions

Can any alloy wheel be diamond cut?

Most alloy wheels can receive a diamond cut finish. Some designs are not suitable. We assess your wheels and advise on the best option.

How long does diamond cut wheel repair take?

Most work takes 2 to 3 working days per set. This allows proper curing between stages. Loan wheels keep you on the road.

How much does it cost?

Prices depend on wheel size and condition. Contact us for a free quote. Our 3 year warranty means excellent value. Read our full guide on how much alloy wheel refurbishment costs and whether it is worth it.

How do I care for diamond cut wheels?

Wash regularly with pH-neutral shampoo. Avoid harsh chemicals and abrasive cleaners. Do not use automatic car washes with spinning brushes.

How long will the finish last?

With proper care, your diamond cut finish looks great for years. Our warranty covers the lacquer against defects.

How do I know if my wheels need refurbishment?

Look for kerb damage, corrosion, peeling lacquer or dull patches. These are common signs of wear. Our guide on the signs your alloy wheels need refurbishment explains what to look for.

How many times can a diamond cut wheel be re-cut?

Only a limited number of times. Each cut removes a thin layer of metal, so the face eventually becomes too thin to cut safely. The limit depends on the wheel design, how deep the damage is and how many times it has been cut before. We check every wheel first and will tell you honestly if another cut is not safe.

Can I repair diamond cut wheels myself?

No. A diamond cut finish can only be restored by machining the face on a CNC lathe and sealing it with fresh lacquer. Touch-up paint and polishing kits cannot recreate the finish, and cutting away too much metal can weaken the wheel.

Why are there white marks under the lacquer on my diamond cut wheels?

White, cloudy marks or fine white lines usually mean corrosion. Water and road salt have got under the lacquer through a chip or crack and are attacking the bare metal. It spreads over time, so it is best to have it repaired early, before more metal needs to be cut away.

Can I use a pressure washer on diamond cut wheels?

Yes, but keep the nozzle well back from the wheel and use a lower setting. High pressure held close can force water into small chips in the lacquer, which can lead to corrosion.

Choose Your Store